Register | Login
Icons_community.gif
.
 


You are not logged in. Login now!

 
Forums > Embroidery Software > Wilcom ES
Subject: Wilcom 7.1 on Vista

You are not authorized to post a reply.   
Author Messages
dmc User is Offline
Posts: 3
Location:

Rank: Newbie
Newbie

View Profile
12/14/2007 11:49 PM Alert 
Has anyone figured out how to get Wilcom ES 7.1 to run on Windows Vista.
I have played around in the compatability mode and got it to launch and work, but not the right resolution. (it took up too much screen to be usable).
I have 20+ years of digitizing on Wilcom and well over 75.000 designs, and have spent a ton on software and upgrades/updates over the years, so I stopped at 7.1. Any suggestions would be appreciated!!
-dmc
mousteffa User is Offline
Posts: 1
Location:

Rank: Newbie
Newbie

View Profile
12/15/2007 7:00 AM Alert 
unique User is Offline
Posts: 85
Location: Lansing, MI

Rank: Regular
Regular

View Profile
12/15/2007 1:40 PM Alert 

Version 7.1 will not run on Vista. I'm surprised you got as far as you did.  Vista is a whole new world and a lot of programs will not work on it unless you are able to get a patch (update driver).  That is why allot of software will note if it’s compatible, so if it’s don’t say Visa ready it may not work correctly.
Greg K
Unique Embroidery & Printing
Wilcom Authorized Training Center & Distributor

P.S.
I am a Wilcom Authorized Trainer & Distributor; you can find me in the Training; in the Training School section, Categories "US"
or Email me Unique@cablespeed.com
dmc User is Offline
Posts: 3
Location:

Rank: Newbie
Newbie

View Profile
12/15/2007 2:23 PM Alert 

If i got as far as I did, it proves it will run!
Anyone out there that has had more time to play with this or is looking to, i'm open to suggestions... its down to just a resolution setting to make it formatted correctly.

Any geeks out there with free time???
EMBdigitizer User is Offline
Posts: 4
Location:

Rank: Newbie
Newbie

View Profile
01/01/2008 9:45 AM Alert 
dmc,
Did you get it to run on XP sp2? If so, what's the trick.
dmc User is Offline
Posts: 3
Location:

Rank: Newbie
Newbie

View Profile
01/01/2008 12:27 PM Alert 
It runs fine on XP sp2.
Had some issues early on getting it to load fully, but it is fine and very stable.

If it doesnt see the security dongle (USB type), you will need to go online and get the drivers from the dongle manufacturer. I think mine was a Aladdin brand one, their site has the correct drivers for them.

Hope that helps.
EMBdigitizer User is Offline
Posts: 4
Location:

Rank: Newbie
Newbie

View Profile
01/01/2008 1:15 PM Alert 
Hi dmc,
Greg K @ Unique Embroidery & Printing helped me with the dongle issue. I still have the parallel one. Evidently when you reload Wilcom you also have to load the "HASP" driver, which I downloaded from the Wilcom site. FYI: HASP4 is for Ver 9 and below. HASP5 is for Vista...
I have one other problem that followed me over from 2000 pro to xp. For some reason when I scroll down the list of esa fonts, I come to all my ttf fonts. At that point the system crashes. Is there a way for Wilcom to only look at the *.esa fonts and not see the ttf fonts?
Thank you and Greg for the help.
azhir User is Offline
Posts: 1
Location:

Rank: Newbie
Newbie

View Profile
01/01/2008 10:46 PM Alert 
Has anyone figured out how to get Wilcom ES 7.1 to run on Windows Vista.
I have played around in the compatability mode and got it to launch and work, but not the right resolution. (it took up too much screen to be usable).
I have 20+ years of digitizing on Wilcom and well over 75.000 designs, and have spent a ton on software and upgrades/updates over the years, so I stopped at 7.1. Any suggestions would be appreciated
azhir
You are not authorized to post a reply.
Forums > Embroidery Software > Wilcom ES > Wilcom 7.1 on Vista


ActiveForums 3.6
Copyright 2007 EmbroideryStartup.com Advertise with us :: Privacy Statement :: Terms Of Use