DecoNetwork v4 - Webinar Vector
Register | Login
tit_Forums.jpg
.
 


You are not logged in. Login now!

 
Forums > Embroidery Discussions > Embroidery Machines
Subject: DIY Low Cost computerised Embroidery Machine

You are not authorized to post a reply.   
Author Messages
Khalid KhattakUser is Offline
Posts: 5
Location:

Rank: Novice
Novice
26 Dec 2009 3:05 AM Alert 
Hi, First of all thank s for such a nice Forum.... I have studied a lot and you guys are geniuses...

Okay... My VISION is to design a embroidery Machine with :
 
1- Low Cost and Easily available material
     a) Ordinary Manual sewing Machine i.e.  less than $60
     b) Some electronics and stepper Motors  i.e. $150               
     c) One Computer with Accessories
     d) Machine Control Software (Mach3) i.e. less than $200
     e) Some Aluminium Profile+Nuts/Bolts for making structure   i.e. less than $40
     f) My Software that will convert industrial standard DST format into Gcode

WHAT Machine will able to Do?
1- I will make it sure that the machine will able to perform  all stitches that WILCOM or anyother software support...

2- Machine will stop for every thread change and will provide you input What Colour thread has to be changed

3- The Working area will be 9" x 20" (228.6mm x 508mm) that can be further extendible... So we will have no constraint in embroidery area.

WHAT I HAVE DONE SO FAR:

1- I have made a program that will help you changing the Complex DST Format into my Controller readable industrial Standard Gcode format. I have tested my program output in SImulator and its 100% perfect

2- My Machine basic drawing is in Progress and i will start making this Machine in coming weekend.

The difference between my Machine and Other DIY's Machine is that it can be used to do Commercial stitches and all the stuff the Wilcom Support for a single Needle Machine.

My This Machine will bring revolution in Embroiderer industry, and many home hobbiest will get maximum benefit with very low cost...


If the Peoples here interested I will post my R & D here.

Regards


My blog:
www.my-woodcarving.blogspot.com
saudUser is Offline
Posts: 1
Location:

Rank: Newbie
Newbie
28 Dec 2009 8:03 PM Alert 
can i have your email address (saud110@hotmail.com)
Khalid KhattakUser is Offline
Posts: 5
Location:

Rank: Novice
Novice
28 Dec 2009 8:09 PM Alert 
Yes you can have it
engr_khalid_khattak (@) yahoo.com
Khalid KhattakUser is Offline
Posts: 5
Location:

Rank: Novice
Novice
05 Mar 2010 1:18 AM Alert 

See the DIY embroidery software and detail of machine here..

http://my-woodcarving.blogspot.com/
You are not authorized to post a reply.
Forums > Embroidery Discussions > Embroidery Machines > DIY Low Cost computerised Embroidery Machine


ActiveForums 3.6
Copyright 2010 EmbroideryStartup.com Advertise with us :: Privacy Statement :: Terms Of Use