DecoNetwork v4 - Webinar Vector
Register | Login
tit_Forums.jpg
.
 


You are not logged in. Login now!

 
Forums > Embroidery Discussions > Embroidery Machines
Subject: Networking TFGN 930 Tajima

You are not authorized to post a reply.   
Author Messages
Vishal chohanUser is Offline
Posts: 1
Location:

Rank: Newbie
Newbie
02 Dec 2009 7:41 PM Alert 

Hi

  I have 5-6 units of Tajima TFGN 930 Installed. I am transfereing designs from PC to Emg Units via Floppies. There is networking option available in the machines. It would be of hreat help if I am suggested a way out. technically I am a electronic engg & MCSE so software & hardware spec are no issue to me.

 

I have browsed thru the O/S of machines all are Windows Ce platform with Onboard USB options & one RJ45 port & 2 PS2 type connectors .

Please help

Regards

Vishal.

 
HankUser is Offline
Posts: 1
Location:

Rank: Newbie
Newbie
05 May 2011 7:14 PM Alert 
If you have any clue to usb drive on tajima tfgn (windows ce) please do share with me.

regards

Hank
EMBStartUpUser is Offline
Posts: 106
Location:

Rank: Regular
Regular
06 May 2011 4:59 PM Alert 
Hi

Depending on the software, but most software should be able to send designs direct to the machine with a cable.

It is best to contact your local Tajima distributor as they can best recommend the settings for your particular machine model.
Regards,
Technical Services
=======================
EmbroideryStartup.com
You are not authorized to post a reply.
Forums > Embroidery Discussions > Embroidery Machines > Networking TFGN 930 Tajima


ActiveForums 3.6
Copyright 2010 EmbroideryStartup.com Advertise with us :: Privacy Statement :: Terms Of Use